• Type 2 to Type 2
• 7.2kW (32A, 1 Phase)
• 20 meters long
• IP55 rate
• Hand-held ergonomic design
€320.65incl. VAT
• Type 2 to Type 2
• 7.2kW (32A, 1 Phase)
• 20 meters long
• IP55 rate
• Hand-held ergonomic design
In stock
UPS-DELIVERY
SECURE-PAYMENT
ECO-PACKAGING
24-warranty
With this EV Charging Cable Type 2 to Type 2 32A 1 Phase 20m, you can charge your EV/PHEV that has Type 2 port with an EV charging station that has Type 2 socket. The cable is 32 Amp, single-phase, can charge your EV up to 7.2 kW. The product has a nice appearance, a hand-held ergonomic design and is easy to plug. The working length is 20 meters and is made from thermoplastic material. It has protection level IP55, is anti-flaming, pressure-resistant, abrasion-resistant and impact resistant.
We recommend to use the following steps:
1. Plug in the Type 2 male end of the cable to the charging station
2. Plug in the Type 2 female end of the cable to the car’s charging socket
3. After the cable has clicked in place you are ready for the charge*
*Don’t forget to activate the charging station
When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the cable from the charging station when not in use.
This product is the lifeline of your electric vehicle and is important to keep it protected. Store the cable in a dry place preferably a storage bag. Moisture in the contacts will result in the cable not working. If this happens, place the cable in a warm and dry place for 24 hours. Avoid to leave the cable outside where sun, wind, dust and rain can get to it. Dust and dirt will result in the cable not charging. For longevity, ensure that your cable is not twisted or excessively bent during storage.
This product is very easy to use and store. The cable is designed for both outdoor and indoor charging and it has IP55 (Ingress Protection). This means that it has protection from dust and splash of water from any direction.
Specifications
Weight | 9 kg |
---|---|
Plug Type | IEC 62196 (Type 2-Female) |
Power Supply Plug | IEC 62196 (Type 2-Male) |
Power | 7.2 kW |
Maximum Current | 32 A |
Power Supply | 1-Phase |
Operational Voltage | 480 V/AC |
Operational Temperature | -30 °C to +50 °C |
SPEC | 3G6.0mm²+2×0.5mm² |
Degree of Protection | IP55 |
Vandalism-Proof | No |
UV Resistant | Yes |
Certificate | CE |
Cable Material | Thermoplastic |
Cable Length | 20 m |
Manufacturer | EV+ |
Warranty | 24 months |
Only logged in customers who have purchased this product may leave a review.
No files available for this product.
Andreas –
Super schnell. Gute Kommunikation. Gerne wieder
Espen –
Bra priser og god kvalitet!