- TESLA PN: 1067348-00-A
- SAE J1772 (J plug)
- 19.2 kW
- Compatible with Tesla 3, S or X
- Charge Tesla at non-Tesla charging station
Adapter Type 1 Tesla SAE J1772
€221.43incl. VAT
UPS-DELIVERY
SECURE-PAYMENT
ECO-PACKAGING
24-warranty
Europe
- International UPS/DPD standard shipping 3-4 working days
- International UPS express delivery 1-2 working days
North America, South America, Asia, Africa
- International UPS express delivery 1-3 working days
This adapter type 1 Tesla SAE J1772 will allow any Tesla Model 3, S or X to charge from a Type 1 (J1772) charging plug. Compatible with most Level 2 public charging stations, the J1772 Adapter supports charging speeds up to 19.2kW.
The product has a nice appearance, a hand-held ergonomic design and is easy to plug. It is small, perfect for traveling and easy to store. Complete with a handy carrier bag. It is made from thermoplastic material and has a protection level IP54. This means that it has protection from dust and splash of water from any direction.
How to use adapter type 1 Tesla SAE J1772:
We recommend to use the following steps:
- Plug in the Type 1 end of the adapter to the charging cable
- Plug in the adapter type 1 Tesla SAE J1772 end of the adapter to the car’s charging socket
- After the adapter has clicked in place you are ready for the charge*
*Don’t forget to activate the charging station
When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the cable from the charging station when not in use.
How to store:
This product is the lifeline of your electric vehicle and is important to keep it protected. Store it in a dry place preferably a storage bag. Moisture in the contacts will result in the cable not working. If this happens place product in a warm and dry place for 24 hours. Avoid to leave the adapter outside where the sun, wind, dust and rain can get to it. Dust and dirt will result in the cable not charging. The product is very easy to use and store.
Safety notes:
- Always check the cable, adapter and the contacts for damage and contamination before using them.
- Never use a damaged product for charging.
- Never use contacts that are dirty or damp.
- Only connect the charging adapter to vehicle inlets and infrastructure socket outlets that are protected against water, moisture and liquids.
- Never use force to disconnect the plugs. Dangerous electric arcs could result in serious injury or death.
- There are electric vehicles that can be started with the cable connected. Always make sure to disconnect it before driving away.
- If the connector is smoking or melting, never touch it. If possible, stop the charging process. Press the emergency stop switch on the charging station in any case.
- Make sure that the cable is out of the reach of children. Only persons with a valid driver’s license for motor vehicles can use it.
Specifications
| Weight | 1 kg |
|---|---|
| Plug Type | SAE J1772 (Type1-Male) |
| Power | 3.6 kW, 7.2 kW, 11 kW |
| Maximum Power | 19.2kW |
| Maximum Current | 32 A |
| Manufacturer | Tesla |
| Warranty | 24 months |
Only logged in customers who have purchased this product may leave a review.
No files available for this product.
Related products
-
€137.94incl. VAT
-
€732.05incl. VAT
-
€125.84incl. VAT
-
€162.14incl. VAT
-
€1,207.58incl. VAT
-
€150.04incl. VAT
-
€145.20incl. VAT
Steffan –
Nice adapter to convert form Type 1 cable to tesla USA car socket. Good for imported cars from USA!
Esa –
Täydellinen sovitin Yhdysvaltain Tesla model S
Tom –
With this adapter i can charge my Tesla from regular type 2 charging cable!
Johan –
Bara positivt!
Mathias –
Super nöjd med allt som jag har beställt från EV +!
Henrik –
Enkelt, supersnabbt
Denny –
Super schnelle Lieferung, Gut verpackt, alles top!
Håkon –
Rask levering og bra kvalitet på produktet.
Jonas –
Snabb frakt och varan funkar som den ska!
Allan Bosen Larsen –
Perfekt. Levering til tiden og produkterne lever op til forventningerne.