Schuko to Type 2 EV adapter 16 Afor your electric vehicle, electric motorbike or scooter. This adapter helps to charge an EV with a Schuko connector (plug) to a Type 2 charging station. It is useful to use this adapter when you have a Schuko cable and you want to charge from a private or public charging station with Type 2 output. Also with this adapter, you can connect the car’s engine heating system in your vehicle using your EV charging station.
How to use Schuko to Type 2 EV adapter:
We recommend to use the following steps:
1. Plug in the Type 2 end of the adapter to the charging station
2. Plug in the Schuko plug to the adapter
3. After the adapter is connected you are ready for the charge*
*Don’t forget to activate the charging station
This Schuko to Type 2 EV adapter is to be used with charging stations you can stop manually. When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the adapter from the charging station when not in use.
How to store:
The charging adapter is the lifeline of your electric vehicle and is important to keep it protected. Store it in a dry place preferably a storage bag. Moisture in the contacts will result in the cable not working. If this happens place the cable in a warm and dry place for 24 hours. Avoid to leave the adapter outside where the sun, wind, dust and rain can get to it. Dust and dirt will result in product not charging. For longevity, ensure that your charging adapter is not twisted or excessively bent during the storage.
The product is very easy to use and store. It is designed for both outdoor and indoor charging and it has IP55 (Ingress Protection). Therefore, this means that it has protection from dust and splash of water from any direction.
Always check the cable, adapter and the contacts for damage and contamination before using them.
Never use a damaged product for charging.
Never use contacts that are dirty or damp.
Only connect the charging adapter to vehicle inlets and infrastructure socket outlets that are protected against water, moisture and liquids.
Never use force to disconnect the plugs. Dangerous electric arcs could result in serious injury or death.
There are electric vehicles that can be started with the cable connected. Always make sure to disconnect it before driving away.
If the connector is smoking or melting, never touch it. If possible, stop the charging process. Press the emergency stop switch on the charging station in any case.
Make sure that the cable is out of the reach of children. Only persons with a valid driver’s license for motor vehicles can use it.
Power Supply Plug
IEC 62196 (Type 2-Male)
-30 °C to +50 °C
Degree of Protection
Copper alloy + Silver plated
Only logged in customers who have purchased this product may leave a review.