- CCS Combo 1 to CCS Combo 2
- 90kW (150A)
- IP54 rate
- Charge USA-made EVs in Europe
CCS Combo 1 to CCS Combo 2 Fast Charge Adapter
€605.00
Out of stock
Ask for product
EV adapter fast charge CCS Combo 1 to CCS Combo 2 has a nice appearance, a hand-held ergonomic design, and is easy to plug. It is made from thermoplastic material and has a protection level of IP54. This means that it has protection from dust and splash of water from any direction. Almost all of the fast-charging stations in the EU use three types of plugs: DC CHAdeMO; AC Type 2 and DC Combined Charging System (CCS). In order to charge an EV that has a CCS socket Combo 1 from the fast-charging station Combo 2, you need to use this adapter, which allows connecting CCS 1 EV to CCS 2 Station. To charge USA-made EVs in Europe.
How to use EV Adapter CCS Combo 1 to CCS Combo 2 fast charge:
We recommend to use the following steps:
1. Plug in the Combo 2 end of the adapter to the charging cable
2. Plug in the Combo 1 end of the adapter to the car’s charging socket
3. After CCS Combo 1 to CCS Combo 2 adapter has clicked in place you are ready for the charge*
*Don’t forget to activate the charging station
When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the cable from the charging station when not in use.
How to store:
This product is the lifeline of your electric vehicle and is important to keep it protected. Store it in a dry place preferably a storage bag. Moisture in the contacts will result in the cable not working. If this happens place the product in a warm and dry place for 24 hours. Avoid leaving the adapter outside where the sun, wind, dust, and rain can get to it. Dust and dirt will result in the cable not charging. The product is very easy to use and store.
Safety notes:
- Always check the cable, adapter and the contacts for damage and contamination before using them.
- Never use a damaged product for charging.
- Never use contacts that are dirty or damp.
- Only connect the charging adapter to vehicle inlets and infrastructure socket outlets that are protected against water, moisture and liquids.
- Never use force to disconnect the plugs. Dangerous electric arcs could result in serious injury or death.
- There are electric vehicles that can be started with the cable connected. Always make sure to disconnect it before driving away.
- If the connector is smoking or melting, never touch it. If possible, stop the charging process. Press the emergency stop switch on the charging station in any case.
- Make sure that the cable is out of the reach of children. Only persons with a valid driver’s license for motor vehicles can use it.
Specifications
| Weight | 4.9 kg |
|---|---|
| Power | 90 kW |
| Maximum Current | 150 A |
| Operational Voltage | 600 V/DC |
| Operational Temperature | -30 °C to +50 °C |
| Degree of Protection | IP54 |
| SPEC | 2x1AWG+1x6AWG+6x20AWG |
| UV Resistant | Yes |
| Certificate | CE, UL |
| Manufacturer | Duosida |
| Warranty | 24 months |
Only logged in customers who have purchased this product may leave a review.
Adriel –
Bra produkt för mitt behov.
Jonas –
Snabb frakt och varan funkar som den ska!
Juuso –
Hyvä palvelu, osaava henkilökunta.
Svein –
Rask leveranse, og varene med forventet kvalitet.
Lars –
Helemaal tevreden!
Γιάννης –
Αγόρασα δύο προϊόντα για το καινούργιο μου Nissan Leaf. Λειτουργούν όπως θα έπρεπε.
Harald Sköld –
Alltid hög kvalitet när man beställer från EV Charge + ! Mycket nöjd.