EV charging station mini Type 1
EV charging station Homebox mini

EV Charging Station – Homebox Mini Type 1

€544.50 – €629.20incl. VAT

  • Type 1
  • Power Range 3.6 kW or 7.2 kW
  • 1 Phase, 16A or 32A
  • Integrated 5m cable
  • IP54 rate
UPS-DELIVERY

UPS-DELIVERY

SECURE-PAYMENT

SECURE-PAYMENT

ECO-PACKAGING

ECO-PACKAGING

24-warranty

Ask for product

    SKU: EV-ST-ELN-HBM-T1 Category:

    EV Charging Station – HomeBox mini Type 1 is designed to be a simple and cost-effective solution for fast EV charging. This HomeBox can be used in garages, parking lots and other private areas, where no authentication is required. The bright red status light on the Start/Stop buttons is visible even in direct sunlight. Integrated energy meter with LED back-light is convenient for separating your EV from the domestic energy bill.

    About EV Charging Station – Homebox Mini Type 1

    EV charging station – Homebox Mini features:

    • Simple and professional
    • 3.6 kW or 7.2 kW
    • Integrated 5m charging cable Type 1 + smart energy meter
    • Simple installation

    Product can be used at:

    • Private car parking
    • Your garage
    • Fleet parking
    • Company territory

    How to use:

    How to start the charging

    1. Firstly, the most important step is to make sure the charger is well connected to the power.
    2. Secondly, use your Type 1 charging cable plug to connect the charging station with your electric vehicle.
    3. Once the charging cable has clicked in place you are ready to start the charge.

    How to stop the charging

    1. Firstly, disconnect the charging cable from the electric vehicle’s side when you finish charging.
    2. For longevity, ensure that your charging cable is not twisted or excessively bent during the storage.

    How to check the charging status

    1. When the charging station is ready for charge a green light will appear on the station.
    2. After you connect the charging cable and the car starts charging a blue light indication will appear on the charging station.

    Always keep the plastic protection lid on the charging station closed. Keep the cable away from water. Moisture in the contacts will result in the cable not working. If this happens, leave the cable to dry for 24 hours. Dust and dirt will also result in the cable not charging so make sure you keep it clean. This product is ideal for indoor installation and use.

    For more accessories check here.

    Safety notes:

    WARNING: The input and output voltages of this device are dangerously high, which can endanger human life safety. Please strictly observe all warnings and operating instructions on the device and in the manual. Unauthorized and non-professional service personnel should not remove the cover of this device.

    • Keep the charging socket clean and dry. If dirty please wipe with a clean dry cloth. To touch the socket core is strictly forbidden when the power is on.
    • The device should be supervised when using it around children.
    • Do not put fingers into the electric vehicle connector.
    • Do not use the charger in case the device has defects: broken, cracked, open or shows any other indication of damage. Power cord or EV cable is frayed, has broken insulation, or any other signs of damage. 
    • Please charge cautiously in rain or lightning weather conditions.
    • Install your charger in a sufficiently ventilated location and avoid installation in areas with direct sunlight.

    Specifications

    Weight 5 kg
    Dimensions 256 × 140 × 250 mm
    Socket Type

    Mode 2—CEE 7/4 (Schuko), Mode 3—SAE J1772 (Type 1)
    Power

    3.6 kW, 7.2 kW
    Power Supply

    1-Phase
    Energy Meter

    Digital with backlight
    RFID User Access Control

    Optional
    LED Status Indication

    Integrated
    Installation

    Wall mounting
    Operational Temperature

    -30 °C to +50 °C
    Degree of Protection

    IP54
    Impact Resistance

    IK08
    Vandalism-Proof

    No
    Housing

    Plastic
    UV Resistant

    Yes
    Certificate

    CE
    Standard

    IEC 61851-1
    Charging Cable Locking

    Optional
    Overcurrent Protection

    Integrated
    Leakage Current Protection

    Integrated
    Cable Length

    5 m
    Warranty

    24 months

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    No files available for this product.

    Basket Close
    Updating…
    • No products in the basket.

    Continue shopping

    You may also like